The entire ESP ecosystem is quite accessible for people of modest technical ability.
HomeAssistant+ ESPHome + ESP32 in particular is a good stack because it takes away most of the complexity. Common sensors have ESPHome code available with a quick google so just need to connect the wires right basically
Indeed about ESP32 being approachable. I particularly enjoyed finding and messing about with the Cheap Yellow Display. It’s a fun little platform and with LVGL making it pretty is a joy.
Would have been a nicer fit (smaller bevel) than the LCD in this project at about the same cost.
BLE and WiFi are power hungry on any platform. LoRaWAN or zigbee are better for low power, low bw comms. Kinda sacrifice simplicity & ubiquity of support in that you need a gateway/router of some sort, but they are solid solutions with long range and high penetration.
FYI: A couple of the images down in the article are not loading (And later some seem to be incorrectly formatted). I'm especially looking forward to the exploded button.
bro your images are giant. every load of the page is transferring 40ish MB. back_panel_back_render.png is 11.3 MB. replace those with smaller versions and click to link to the larger.. but I do see both cloudfront and cloudflare headers so not sure why these aren't being cached by them
Thanks for letting me know, I will have to fix this soon. This was the first post as part of a new blogging setup I'm using and clearly I'm missing some of my old processes (like image resizing).
They are photographic images saved as PNG, which is lossless and intended for digitally created images with large areas of pixels with the exact same value. Please use a format intended for photographic images. Splashflag.png is 4.5 MB, it's 10.5 MB as an uncompressed BMP file, but only 600 KB as a JPEG with indistinguishable quality loss.
If you want to avoid “long polling” then MQTT isn’t the answer (it’s still a long held TCP connection waiting for messages). UDP would be the way to go, and with WireGuard as a carrier you don’t have to worry about NAT traversal issues (and get privacy as a bonus).
Love the project - would have been great when my kiddos were that age.
When I got to auto[ssid, etc in main.c it became clear the sophistication/excursion from the typical Esp32 code centerline is at many levels. Thanks for sharing!
The entire ESP ecosystem is quite accessible for people of modest technical ability.
HomeAssistant+ ESPHome + ESP32 in particular is a good stack because it takes away most of the complexity. Common sensors have ESPHome code available with a quick google so just need to connect the wires right basically
Indeed about ESP32 being approachable. I particularly enjoyed finding and messing about with the Cheap Yellow Display. It’s a fun little platform and with LVGL making it pretty is a joy.
Would have been a nicer fit (smaller bevel) than the LCD in this project at about the same cost.
Problem is that ESP32s are super power hungry once you start using BLE or Wifi.
For BLE you can use STM32s and Nordics. But Wifi-on-Chip is ESP32-only.
BLE and WiFi are power hungry on any platform. LoRaWAN or zigbee are better for low power, low bw comms. Kinda sacrifice simplicity & ubiquity of support in that you need a gateway/router of some sort, but they are solid solutions with long range and high penetration.
Author here. Thanks for reading. This was a massive learning project for me, I'm happy to answer questions or feedback.
FYI: A couple of the images down in the article are not loading (And later some seem to be incorrectly formatted). I'm especially looking forward to the exploded button.
D'oh. Thank you for letting me know. All fixed now. Hopefully "exploded button" wasn't too misleading (more of an exploded view of the design).
bro your images are giant. every load of the page is transferring 40ish MB. back_panel_back_render.png is 11.3 MB. replace those with smaller versions and click to link to the larger.. but I do see both cloudfront and cloudflare headers so not sure why these aren't being cached by them
Thanks for letting me know, I will have to fix this soon. This was the first post as part of a new blogging setup I'm using and clearly I'm missing some of my old processes (like image resizing).
They are photographic images saved as PNG, which is lossless and intended for digitally created images with large areas of pixels with the exact same value. Please use a format intended for photographic images. Splashflag.png is 4.5 MB, it's 10.5 MB as an uncompressed BMP file, but only 600 KB as a JPEG with indistinguishable quality loss.
They probably need the origin server to set the right cache headers, otherwise the cdn would get blamed for stale images
Almost Name Twin here (brett wagner) just saying hey.
If you want to avoid “long polling” then MQTT isn’t the answer (it’s still a long held TCP connection waiting for messages). UDP would be the way to go, and with WireGuard as a carrier you don’t have to worry about NAT traversal issues (and get privacy as a bonus).
Love the project - would have been great when my kiddos were that age.
Thank you and I'm glad you enjoy the project. I'll have to look more into UDP for this type of solution.
When I got to auto[ssid, etc in main.c it became clear the sophistication/excursion from the typical Esp32 code centerline is at many levels. Thanks for sharing!
This is wonderful! Thanks for sharing!!